BYTLR - MIL-G-10924F, SL-065, LUBRICATING GREASE

  • MSDS: BYTLR
  • Manufacturer: SUMMIT LUBRICANTS INC
  • Product Name: MIL-G-10924F, SL-065, LUBRICATING GREASE
  • National Stock Number: 9150-01-197-7690
Product Identification

Product ID:MIL-G-10924F, SL-065, LUBRICATING GREASE
MSDS Date:04/01/1993
FSC:9150
NIIN:01-197-7690
MSDS Number: BYTLR

Responsible Party
SUMMIT LUBRICANTS INC
4080 PEARL STREET
BATAVIA, NY 14021
US

Emergency Phone: 716-344-4301/716-685-1576

Info Phone: 716-344-4301/716-685-1576

Preparer: RON KROL

Cage: 0R0E6

Contractor
SUMMIT LUBRICANTS INC
966 BATAVIA, NY 14020 US

Telephone: 716-344-4301/716-685-1576

Cage: 0R0E6

Ingredients

ZINC COMPOUNDS

Fraction By Weight: 1.8% %


LITHIUM 12 HYDROXYSTEARATE COMPLEX

CAS: 68815-49-6

Fraction By Weight: 12% %


POLYALPHAOLEFIN BASE STOCK

CAS: 68649-12-7

Fraction By Weight: 63% %


DISTILLATES, HYDROTREATED HEAVY PARAFFINIC

CAS: 64742-54-7

RTECS: PY8035500

Fraction By Weight: 12% %

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM


PROPRIETARY INGREDIENTS

Fraction By Weight: 13% %

Hazards

LD50 LC50 Mixture:TLV 5 MG/M3 FOR MINERAL OILS
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THIS PRODUCT HAS BEEN USED FOR YEARS
WITH NO KNOWN ILL EFFECTS.
Explanation of Carcinogenicity:PRODUCT CONTAINS NO INGREDIENTS
CURRENTLY CLASSIFIED AS CARCINOGENIC BY NTP, IARC OR OSHA.
Effects of Overexposure:MILD SKIN IRRITATION, MILD EYE IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INGESTION: DO NOT INDUCE VOMITING. GET MEDICAL ATTENTION.
SKIN: FLLUSH WITH SOAP AND WATER. REMOVE AND LAUNDER CONTAMINATED
CLOTHING. EYES: FLUSH WITH WATER FOR 15 MINUTES. GET MEDICAL
ATTENTION. INHA LATION: NOT APPLICABLE.

Fire Fighting

Flash Point Method:COC
Flash Point:470F,243C
Autoignition Temp:Autoignition Temp Text:510F
Extinguishing Media:WATER FOG, CARBON DIOXIDE, DRY CHEMICAL, FOAM,
EARTH OR SAND
Fire Fighting Procedures:WATER MAY CAUSE FROTHING
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:ABSORB WITH SAND OR INERT MATERIAL. SWEEP OR
SCOOP UP AND REMOVE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP AWAY FROM SPARKS AND OPEN FLAMES.
Other Precautions:WASH THOUROUGHLY FATER HANDLING. DO NOT GET IN EYES
OR ON CLOTHING.

Exposure Controls

Ventilation:USE WITH ADEQUATE VENTILATION
Protective Gloves:NEOPRENE, BUTYL RUBBER, POLYETHYLENE
Eye Protection:FACE SHIELD
Other Protective Equipment:NONE
Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER HANDLING PRODUCT
AND BEFORE EATING DRINKING OR SMOKING.
Supplemental Safety and Health
NONE

Chemical Properties

HCC:V6
Boiling Pt:B.P. Text:700F,371C
Melt/Freeze Pt:M.P/F.P Text:-70F,-57C
Spec Gravity:.088
Solubility in Water:NIL
Appearance and Odor:AMBER GREASE, BLAND ODOR
Percent Volatiles by Volume:0 %

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:OPEN FLAMES
Hazardous Decomposition Products:CARBON MONOXIDE OR CARBON DIXOIDE IF
INCOMPLETE COMBUSTION

Disposal

Waste Disposal Methods:INCINERATE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.